Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
7
SETTING TEMPERATURE RANGE (MAX/MIN)
Setting to different temperature range will allow you to change color bar temperature range).
(e.g. default setting is min = 0 °C & max = 30 °C & color bar is set from blue-green-red color).
For Blending/Thermal mode, any object temperature below 0 °C will display "blue" and any object
temperature above 30 °C will display "red" while an object temperature between 1 °C and 29 °C
will display "green". If you change the minimum temperature to 10 °C and the maximum
temperature to 40 °C, the display of color bar will shift to 10 °C above the default setting. Any object
temperature below 10 °C will display "blue" and any object temperature above 40 °C will display
"red" while an object temperature between 11 °C and 39 °C will display "green".
Press
to Menu mode.
8
SETTING TEMPERATURE UNIT (°C/°F)
Press
to Menu mode.
9
SOFTWARE VERSION
Press
to Menu mode.
Max
Min
M a x / M i n
Press
and
or
to choose
.
Max
Min
Press trigger.
Max
Min
U n i t
Press
and
or
to choose
.
Press trigger.
Max
Min
V e r s i o n
Choose
to indicate
software version.
Press trigger.
RECORDABLE THERMAL IMAGER 057-4582-6
M a x / M i n
Max
Min
M A X : 3 0 M I N : 0
and
Press
or
max. and min. temperature.
U n i t
C / F
and
Press
and
or
to choose °C/°F.
V e r s i o n
2 0 1 2 1 0 0 9 1 0 0 0
Press trigger to
confirm.
Press
to exit.
to adjust
Press trigger to
confirm.
Press
to exit.
and
Press
to exit.
8
Publicité
Table des Matières
