Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Training
Read the operating and maintenance instructions carefully. Make yourself thoroughly familiar with the control devices and the proper
use of the device. You need to know how the device works, and how the control equipment can be turned off quickly. Never let
children operate the device. Never allow adults without proper training to work with the device. Keep the work area free of any person
especially young children, and pets. Be careful to avoid that you slip or fall.
Step-by-Step Instructions
Put the chain in a clamping device.
Set the sharpening angle.
Set the links and depth delimiters spaces.
Clam the chain, using the respective device.
Switch the unit on.
Tip the chain stop (1) ahead of the respective link in the direction (2).
Now, set the grinding unit heat by pushing it down carefully (3), use
the setting screw (4) to set the chain position (5). The grinding disc
should neatly fit in the link.
Using the set screw (6), set the depth stop. Set the cut to be done
with the set screw (4) and fix in place.
When all the setting is done, fix the chain in the guide bar with the
locking screw (1)
Switch the unit on by pressing the button (1). Take the grinder head
carefully to the link to be sharpened. Repeat the procedure on each
link of the chain.
Mind the right and left cutting links.
If you have sharpened your chain, check the depth delimiters
distance.
The depth delimiters (2) should always be lower than the cutting links.
(1). Where necessary, you should make the delimiters (2) shorter with
a saw file (not included in the scope of delivery) following your chain
data.
35