Table des Matières
Publicité
8
b)
The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience
and/or knowledge unless they are supervised by
a person responsible for their safety or they have
received instruction on how to operate the device.
c)
When working with the device, use common sense
and stay alert. Temporary loss of concentration while
using the device may lead to serious injuries.
d)
To prevent the device from accidentally switching on,
make sure the switch is on the OFF position before
connecting to a power source.
e)
The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
2.4. SAFE DEVICE USE
a)
Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and must be repaired.
b)
Make sure the plug is disconnected from the socket
before attempting any adjustments, accessory
replacements or before putting the device aside.
Such precautions will reduce the risk of accidentally
activating the device.
c)
When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
d)
Keep the device in perfect technical condition.
Before each use check for general damage and
especially check for cracked parts or elements and
for any other conditions which may impact the safe
operation of the device. If damage is discovered,
hand over the device for repair before use.
e)
Keep the device out of the reach of children.
f)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
g)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
h)
Do not leave this appliance unattended while it is in
use.
i)
Clean the device regularly to prevent stubborn grime
from accumulating.
j)
The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
k)
Keep the device away from sources of fire and heat.
l)
Do not look directly or through the lens on the light
source. This can cause eye damage and epileptic
seizures.
m)
Do not leave the magnifying lens unattended in
places with direct sunlight as this creates a fire
hazard. After finishing work, remember to close the
lens cover.
n)
It is forbidden to direct the focused light beam
towards people or animals. It may cause burns.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
3. USE GUIDELINES
The device is designed for viewing details at a larger scale
or as an aid during activities requiring high precision and
bright lighting.
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
3
4
5
2
1
6
7
8*
1.
Lamp head
2.
Lens with LED backlight
3.
Lens cover
4.
Clamp for adjusting head position
5.
Lamp arm
6.
Switch [I/0]
7.
Lamp arm spindle
8*.
The base – its appearance varies depending on the
model.
9.
Power cord with plug (not visible in the picture)
3.2. PREPARING FOR USE
APPLIANCE LOCATION
The temperature of environment must not be higher than
40°C and the relative humidity should be less than 85%.
Ensure good ventilation in the room in which the device
is being used. There should be at least 10 cm distance
between each side of the device and the wall or other
objects. Keep the product away from hot surfaces. The
device should always be used when positioned on an
even, stable, clean, fireproof and dry surface, and be out
of the reach of children and persons with limited mental
and sensory functions. Position the device such that you
always have access to the power plug. The power cord
connected to the appliance must be properly grounded
and correspond to the technical details on the product
label.
ASSEMBLING THE APPLIANCE
Before assembly, carefully unpack all components of the
device and check their condition.
PHY-6ML-1
a)
Place the base on the table, then insert the lamp arm
into the base hole.
b)
Connect the lamp to the power supply.
PHY-6ML-2
a)
Insert the post (B) into the hole of the connector (C).
b)
Install the legs (A) in the side grooves of the
connector (C), then mount the bottom lid (D) to the
connector (C).
c)
Use the screw (G) with a flat washer (E) and a spring
washer (F) to secure the bottom lid. Use the Allen
wrench (H) to twist them. Hold the post (B) with your
hand while screwing it in.
d)
Put the complete base on a level surface, insert the
lamp arm pin into the upper hole of the post (B).
e)
Connect to the power supply.
Caution: Be careful when assembling the base legs,
the corners can be sharp (see the picture)!
B
C
A
A
D
E
F
G
H
A.
Legs
B.
Post
C.
Connector
D.
Bottom lid
E.
Flat washer
F.
Spring washer
G.
Screw
H.
Allen wrench
PHY-6ML-3
When using as a table lamp:
a)
Place the base on the table and open the metal
support (A).
b)
Insert the lamp arm pin into the hole in the base and
use the fixing knob (B) to secure the connection.
c)
Connect to the power supply.
A
A.
Metal support
B.
Fixing knob
When using as a floor lamp:
a)
Place the base on the floor and open the metal
support (A).
b)
Insert the post (C) into the hole in the base, then
secure with the fixing knob (B).
c)
Insert the lamp arm pin into the top hole of the post
and use the fixing knob (D) to secure the connection.
d)
Connect to the power supply.
D
C
B
A
A.
Metal support
B.
Fixing knob
C.
Post
D.
Fixing knob
3.3. DEVICE USE
1.
Check that the power switch [6] is in the off position.
2.
Check if the lamp is securely mounted on the base.
3.
Extend the lamp arm [5] in such a way that the lamp
head [1] is in the desired position above the working
surface.
9
B
Publicité
Table des Matières
