Gira 5491 Série Manuel D'utilisation page 5

Bouton-poussoir de commande de store radio simple
Operating mode
Advanced device settings
Parameters
Manual commissioning
Allow extension unit operation On, Off
Channel settings
Parameters
Operating hours up
Operating hours down
Extended channel settings
Parameters
32582622 10864996
Roller shutter
Venetian blind
Awning
Basic setting: Roller shutter
Setting options, Basic set-
ting
On, Off
Basic setting: On
Basic setting: On
Setting options, Basic set-
ting
0...65535
Basic setting: Current value
0...65535
Basic setting: Current value
Setting options, Basic set-
ting
22.03.2017
Roller shutter
A rolling shutter or an awning
is controlled for which the Fa-
bric stretching function is re-
quired.
Venetian blind
A Venetian blind is controlled.
Awning
An awning is controlled for
which the Fabric stretching
function is required.
Explanations
Disables manual commissio-
ning for all device channels. In
the "Off" setting, the device
cannot be reset to the factory
setting.
Prevents operation via wired
extensions.
Explanations
The time is counted during
which the load is physically
switched on (relay contact clo-
sed).
This parameter can be reset to
"0", for example after exchan-
ging the load.
The Reset button is used to
reset the meter to "0". The de-
vice must be programmed to
apply the change.
The time is counted during
which the load is physically
switched on (relay contact clo-
sed).
This parameter can be reset to
"0", for example after exchan-
ging the load.
The Reset button is used to
reset the meter to "0". The de-
vice must be programmed to
apply the change.
Explanations
5/10