Installation With The Esh System (External Sensor Holder) - Meta System ActivePark4/14 Mode D'emploi

NOTE: DEGREASE THOROUGHLY
BEFORE APPLYING THE TWO-SIDE
ADHESIVE TAPE
Fig. 6
NOTE: TO MAKE SURE OF A CORRECT WORKING, CHECK THAT THE POSITIONING REFERENCE ITEM
(A) IS HORIZONTAL. ONCE THE SENSORS ARE FITTED TO THE BUMPER DO NOT WET OR FORCE
THEM FOR THE NEXT 8 HOURS.

INSTALLATION WITH THE ESH SYSTEM (EXTERNAL SENSOR HOLDER)

NOTE: TO MAKE
SURE OF A CORRECT
WORKING CHECK
THAT THE POSITIONING
DOWEL (*) IS
FACING SIDEWAYS
Fig. 7
16