Speaker Connection - eTIGER Cosmic LED A0 -CL01U Mode D'emploi

Thanks for purchasing the Cosmic LED.
EN
It's a LED light with a built-in Bluetooth speaker and a RF 2.4 GHz remote control
for multidirectional control.
What is in the box?
1x Cosmic LED, 1x Remote control, 2x Adapters (1x B22, 1x E14), 1x Travel bag, 1x Documentation
Structure of the Speaker
1
2

Speaker Connection

1. Take the speaker, remote control, and documentation out of the packaging.
2. Before installing the Cosmic LED on your lamp system, turn off the lamp (do not use a dimmer switch).
3. Screw the Cosmic LED into the socket, turn the power on, the light will be lit. There are 3 levels of light intensity: On(100%), 50%, Off. The
light intensity can be changed with the remote control.
4. Enable Bluetooth connection on your music player (smartphone, tablet, etc.), search for new Bluetooth devices.
5. Select "A0-CL01 Cosmic" in the Bluetooth devices list (make sure the speaker is in pairing mode). When the device status is paired, your
device is ready for use.
6. Play music on your audio source and make sure the volume output is activated.
7. Adjust the audio volume up / down to your desired level.
Note
1. If you want to connect to another audio player when the speaker is working,
first disconnect it by pressing the Bluetooth pairing button for around 5
seconds. The blue LED starts fast blinking (pairing mode). Then follow up from
step 4 above. Two devices cannot be connected simultaneously.
2. The Bi-color light provides various indications (not visible when the light is on–100%).
Fast blinking blue: pairing | Slow blinking red: mute
Blue and red flash alternately: volume is being adjusted
Solid blue: device connected
3. Reset the remote control: Power on the Cosmic LED. Remove the battery from
the remote control. Hold " " while inserting the battery in the remote control,
and wait for 5 seconds. The remote control reset is now completed. This operation
must be completed within 2 minutes after powering on the Cosmic LED.
Caution
1. Heed all warnings on the product and in the operation instructions.
2. Only use accessories that are recommended by the product manufacturer.
3. Keep the device out of extreme heat and humidity. Do not install it near a heater, stove, or any other source of heat.
4. Do not use the device near water, such as sinks, bathtubs, swimming pools, washing machines, tubs of water, etc.
5. If cleaning is required, use a soft dry cloth. Before cleaning, unplug the device from the electrical source.
6. Do not use the device during storm. Turn the power off to prevent damage to the product due to lightning and power-line surges.
7. Don't open the device to avoid electronic shock. Do not plug the light bulb to a live electrical source.
8. The speaker has a wireless range of up to 10m, but wireless performance may be affected in different operating environments.
9. Place the product stable, as any fall may damage it or cause bodily harm.
10. Do not block any opening on the product. Never push any objects into the openings or slots of the device. Doing so may create electric shock or fire
hazard. Maintain some distance around your device to maintain sufficient ventilation.
11. Repair has to be performed by a qualified technician.
12. For lamps carry a weight significantly higher than the replacement product, attention should be drawn to the fact that the increased weight may
reduce stability of certain luminaries or lamp holders and may induce impair contact and lamp retention.
13. Risk of swallowing batteries. The remote control contains a button type battery, which can be swallowed. Always keep the battery out of reach of
children. If swallowed, the battery can cause serious injury or death. Severe internal burns can occur within two hours of ingestion.
14. Risk of hot surface: the product should not be touched without taking care.
3 7
8
4
5 9
10
6 11
1
1. Standard E27 screw
2. Speaker and LEDs
3. Power
4. Play / Pause
5. Volume Down
6. Light On (100%), 50%, Off
7. Mute
8. Previous Track*
9. Volume UP
10. Next Track*
11. Bluetooth Pairing
*The remote control' s functionalities may vary depending
on the device model, the firmware, and/or the application.
Specifications
Input power: 100-240V
Audio output: 11W mono, 10% THD
Light intensity: 7.6W LED
Color temp: warm white 3200k
LED beam angle: 120 degrees
Speaker: 2inch
Max Power consumption: 23 W
Battery: 1 x CR2025 3 V
Product dimensions: 85 x 85 x 135mm