Using The Clearreader + Basic For The First Time; Getting Started; Opening The Camera Arm; Positioning A Document - Optelec ClearReader+ Basic Manuel D'utilisation

Optelec

3. Getting Started

Using the ClearReader
When you use the Optelec ClearReader
+
ClearReader Basic to a mains power outlet using the ClearReader
power supply.

Opening the camera arm

To open the camera, locate the "push" sign on the camera arm at the front
+
of the ClearReader
camera arm until you hear a click. The arm will eject and move towards
you. Close the camera arm in the same way by pushing the end of the arm
back to the closed position until you hear a click.

Positioning a document

The Optelec ClearReader
letter-size page measured from the front side of the ClearReader
position the document, place it in front of the ClearReader
the two document positioning indicators with the top edge of the document
aligned towards the front of the unit. The orientation of the document will not
influence the recognition of the text.
English
+
Basic for the first time
+
Basic between the speakers. Gently push on the
+
Basic camera can capture an area of an A4 or
Basic for the first time, connect the
+
Basic between
ClearReader
+
Basic
+
Basic. To
+
Basic
26