Samsung BRB2601 Serie Guide D'utilisation page 32

Installation
STEP 3 Flooring
32 English
Untitled-9 32
3. Gently pull out the ceiling cover to
remove. The dongle port is revealed.
4. Insert the Smart Home Dongle into the
dongle port. Make sure the dongle fits.
5. Reinsert the ceiling cover, and tighten
the screws (x3) to fix the ceiling cover.
6. Reinsert the screw caps.
• The surface to install the refrigerator
must support a fully loaded refrigerator.
• To protect the floor, put a large piece
of cardboard on each foot of the
refrigerator.
• Once the refrigerator is in its final
position, do not move it unless
necessary to protect the floor. If you
have to, use a thick paper or cloth such
as old carpet along the movement path.
2017-01-31 6:54:49