Table des Matières
Publicité
10
iSTUDIO iS202
iSTUDIO iS202 Controls
(3)
(1)
(2)
(4)
(6)
(7)
(8)
(9)
(10)
(5)
(15)
(13) (14)
(16) (17) (18) (19)
(25)
(24)
(11)
(20)
(12)
(21)
(22)
(23)
iStudio
P16-MB
11
Quick Start Guide
(EN)
Step 2: Controls
(1)
1 & 2 button engages +12 V
phantom power for condenser
microphones on channels 1 & 2
XLR inputs.
(2)
Input 1 Gain Knob adjusts the input
level of audio sources connected to
the combination ¼ "/ XLR connector
for channel 1.
(3)
2 button engages Hi-Z input
on channel 2 ¼ " input.
(4)
Input 2 Gain Knob adjusts the input
level of audio sources connected to
the combination ¼ "/XLR connector
for channel 2.
(5)
Aux button engages phono
level input for use when a turntable
is connected to the LINE/PHONO
AUX RCA inputs.
(6)
Aux Input Gain Knob adjusts
the input level of audio sources
connected to the LINE/PHONO AUX
RCA inputs.
(7)
Monitor (1 / 2 / Aux – iPad) Knob
adjusts the balance between
iStudio input levels and iPad output
levels for low latency monitoring
via the "Phones" connector.
(8)
Main Output Knob adjusts the
volume level of the main outputs.
(9)
Phones Output Knob adjusts
the output volume to the
headphones connector.
(10)
Phones output to 1⁄8"
headphones connector.
(11)
SW FOOT CTRL connects ¼ " input to
an external foot switch.
(12)
connects to the ground wire on
a turntable to prevent the pick up
of electromagnetic interference.
(13)
ON/OFF POWER button turns the
unit on or off .
(14)
DC IN connects to adapter and then
to the mains to power the unit.
(15)
VIDEO OUT output connects to
an external monitor or projector
for displaying video images or
visual accompaniments.
(16)
USB MIDI connects to a computer
via USB cable for MIDI control
and iPad app integration within
DAW software.
(17)
MIDI OUT connects to external MIDI
controllers and input devices.
(18)
MIDI IN connects to external MIDI
sound modules for iPad control.
(19)
EXP FOOT CTRL connects ¼ " input
to an external expression pedal.
(20)
L/R MAIN output connects to
powered speakers for performance
or studio monitoring.
(21)
LINE/PHONO AUX L/R inputs connect
to line level RCA input sources
(CD players, MP3 players, etc.) or to
a turntable (
Aux power button
must be engaged).
(22)
MIC/LINE/GUITAR 2 connects input
from microphones and instruments
via combination ¼ " TRS/XLR
connectors. The ¼ " TRS input on
channel 2 can be used with electric
guitar level signal when the
Hi-Z button is engaged.
(23)
MIC/LINE 1 connects input from
microphones and instruments
via combination ¼ " TRS/XLR
connectors. Both channels 1 & 2
can be used with condenser
microphones when the
button
is engaged.
(24)
BATTERY COMPARTMENT eight
1.5-Volt "AA" batteries can power
the iStudio for mobile operation.
(25)
Mounting Brackets connect the
iStudio to the optional P16-MB
for use with microphone, music,
and drum stands.
Publicité
Table des Matières
