Product; Specifications; Unpacking The Styler - LG STYLER S3RERB Manuel Du Propriétaire

power consumption
safety device
Please read the following installation instructions first after purchasing this
product or transporting it to another location.
Install carpet spikes
(if needed)

SPECIFICATIONS

The appearance and specifications listed in this manual may vary due to constant product improvements.

UNPACKING THE STYLER

WARNING

Use two or more people to move and
install the S tyler. Failure to do so can result in
back injury or other injury.

The S tyler is heavy. Use the wheels at
the bottom of the product to move it. Push the
Styler slowly from about halfway down the front
side.

Keep the S tyler upright when moving
it. If you lay the Styler on its side, refrigerant may
leak and cause the appliance to malfunction. 
1500 W
double overheating safety device, thermal fuse, programming
proper location
Reverse the door swing

PRODUCT

(if needed)
•
from the S tyler before using.
Keep flammable materials and vapors, such as
gasoline, away from the S tyler.
Failure to do so can result in fire, explosion, or
death.
Do not remove any warning labels, the model and
serial number label, or the Tech Sheet that is
located under the front of the Styler.
• To remove any remaining tape or glue, rub
the area briskly with your thumb.
Tape or glue residue can also be easily removed
by rubbing a small amount of liquid dish soap
Connect to grounded outlet
Remove tape and any temporary labels
INSTALLATION 15