SciCan StatClean Manuel D'utilisation page 13

COMMON CLEANING METHODS
During cleaning, debris comes off like a cloud, mucking the water. This method removes silver and
copper oxidation making the items pristine again.
C.Enhanced cleaning.
Debris accumulated over a long period of time, heavily
soiled.
Cleaning Method:
1. Large items can be put in the tank directly,
small items need to be placed into baskets
beforehand. Do not put items atop each other to
prevent rubbing during cleaning.
2. Add room temperature water to the max fill line.
You may add an instrument cleaning solution.
We recommend OPTIM 28 Instrument Cleaner.
Please ensure you follow its instructions for use.
3. Turn the power on.
4. Press Time key to set the timer to 15 minutes.
Press Start/Stop key to start cleaning.
5. When it stops, open the drainage valve
to release the dirty water. Close the valve
afterwards.
6. Clean the tank and add fresh water. Wash the
items for another 3 minutes to remove the
residual debris and detergent.
D. Special cleaning
Silver, copper or brass items that oxidize and darken
need special cleaning.
Cleaning Method:
1. Place items into basket and then into the tank,
adding water to a level within MIN and MAX,
covering the area to be cleaned. Add proper
solution that can remove metal oxidization
according to the recommended ratio.
2. Press Time key to set the timer to 15 minutes.
3. When done, remove basket and items. Rinse
the items with tap water or follow step 6 in the
Enhanced Cleaning section.
9