ION Health USB WRIST BLOOD PRESSURE MONITOR Guide D'utilisation Rapide page 20

Cleaning (continued)
• Do not twist any of the device's tubing. Do not stretch, bend,
or tug on the wrist cuff. Do not turn the cuff inside-out.
• Do not separate the cuff from the unit, disassemble the
device, or try to repair the unit yourself. If any problem
occurs, contact ION Health for service.
TROUBLESHOOTING
Please check the chart below for problems you can fix on your own (no
tools required). For error messages other than the ones below, do not try to
repair by yourself. Please contact ION Health for service.
PROBLEM
The display shows
"Err 00."
The display shows
"Err 02."
The display shows
"Err 04."
The display shows
"Err 09."
CAUSE
Weak pulse.
Systolic pressure
cannot be detected.
Diastolic pressure
cannot be detected.
Cuff pressure is not
enough even at the
highest amount.
20
SOLUTION
Refit the cuff more
snugly, relax, and
repeat the
measurement.
Refit the cuff more
snugly, relax, and
repeat the
measurement.
Refit the cuff more
snugly, relax, and
repeat the
measurement.
Contact ION
Health for service.