Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
Button
Button functions
Bluetooth button
To activate Bluetooth mode.
1. Press to activate Bluetooth mode.
2. Press and hold for 3 seconds to reconnect.
Dialogue mode button
To activate the dialogue mode.
Music equalizer button
To activate the music equalizer mode.
To temporarily turn off the sound. Press the button
Mute button
again to turn the sound back on.
Next
Move to next track.
Volume-down control
To decrease the volume.
Source input button
To change source input. Press this button for 3
seconds to activate Bluetooth pairing mode.
Movie equalizer button
To activate the movie equalizer mode.
The status indicator light will stay on for approximately 10 seconds when
T
the soundbar is in Bluetooth mode / Aux in mode / Optical mode / Coaxial
mode.
Using Your Soundbar
1. Turn On / Off
3
05
2
POWER
1
The soundbar will automatically switch to standby mode when no audio
T
input is received for over 30 minutes. The soundbar will wake up from
standby mode when any button is pressed or source input is received.
a. Connect to your TV
3.5mm to RCA
audio cable
COAXIAL cable
GOOD
BETTER
TV
1. You can use optical cable, coaxial cable or 3.5mm to RCA audio cable to connect
to the respective output port of your TV.
2. Press the source input button on the soundbar or remote control to activate the
corresponding mode.The status indicator will be solid green in optical mode,
orange in coaxial mode and cyan in Aux mode.
Note: The status indicator light will stay on for 10 seconds.
Note: Not all TVs have the audio outputs shown as above, please check your TV's
specifications before setup.
Note: Try set the TV output to PCM if there is no audio sound when using either of the
optical or coaxial inputs.
Note: Coaxial cable is not included.
DIGITAL
DIGITAL
Optical cable
BETTER
EN
06
Publicité
Table des Matières
