Viesta C2Z Manuel D'utilisation page 20

KEN001AKC
Using your ceramic hob
for Viesta C5Z
To start cooking
1. Touch the ON/OFF control, the buzzer beeps once,
all the indicators light up for 1 second then go out,
indicating that the ceramic hob has entered the state
of standby mode.
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the surface
of the cooking zone are clean and dry.
3. Select a heat setting by touching the
control.
Then touch the
• If you don't choose a heating stage within 1 minute,
the ceramic hob will automatically switch off.
You will need to start again at step 1.
• You can modify the heat setting at any time during
cooking.
4. Select a heat setting by touching the "-" or "+" control.
Then touch the
Touch the
The LED indicator will light up, which is on the left side of the dual/triple ring
key.
or to adjust the heating stage.
or , key, dual ring zone will begin to work.
key again, the triple ring zone will begin to work.
[English]
or
[ 20 ]
21.08.2017 • v09