Quick Start Guide - nedis VMAT3474AT Guide De Démarrage Rapide

a

Quick start guide

HDMI Matrix
For more information see the extended manual
online: ned.is/vmat3474at
Intended use
This product is intended to connect up to 4 HDMI inputs with up to
4 HDMI outputs and switch between them.
Any modification of the product may have consequences for safety,
warranty and proper functioning.
Main parts (image A)
1
HDMI Matrix
2
Remote control
Front panel (image B)
1
Remote control sensor
2
HDMI input indicator LEDs
for HDMI output A
3
HDMI input indicator LEDs
for HDMI output B
4
HDMI input indicator LEDs
for HDMI output C
5
HDMI input indicator LEDs
for HDMI output D
6
Power indicator LED
7
Power switch
Rear panel (image C)
1
Power supply port
2
HDMI inputs (1-4)
3
HDMI outputs (A-D)
Remote control (image D)
1
Power button
2
Select HDMI input buttons
for HDMI output A
3
Select HDMI input buttons
for HDMI output B
Safety instructions
- WARNING
•
Do not use a damaged product.
•
Only use the product as described in this manual.
•
Do not expose the product to direct sunlight, naked flames or
heat.
• Do not expose the product to water or moisture.
VMAT3474AT
3
RS-232 connector
4
DC 12 V, 2 A Power adapter
8
Select button, to switch
HDMI input (1-4) to HDMI
output A
9
Select button, to switch
HDMI input (1-4) to HDMI
output B
10
Select button, to switch
HDMI input (1-4) to HDMI
output C
11
Select button, to switch
HDMI input (1-4) to HDMI
output D
4
RS-232 communication port
5
Ethernet port
4
Select HDMI input buttons
for HDMI output C
5
Select HDMI input buttons
for HDMI output D
•
Place the product on a stable and flat surface.
•
Do not drop the product and avoid bumping.
•
Do not open the product.
• Keep the product out of reach from children.
Installation
• Connect HDMI input devices E
using a HDMI cable. A HDMI input device can be for example a
DVD player, a set top box or a game console.
2
• Connect a router E
ethernet cable. This connection enables storing and recalling
routing pre-sets using the PC Software or the Web GUI Interface.
• Connect the HDMI output devices E
3
C
using a HDMI cable.
• Connect a RS-232 Equipped PC or Notebook E
4
port C . To make this connection use a RS-232 to USB cable
and a RS-232 female to 3 Pin Phoenix Connector. This
connection enables storing and recalling routing pre-sets using
the PC Software.
• Connect the power supply port C
the supplied DC 12 V, 2 A power adapter A
Switch HDMI inputs to a HDMI output.
89qw
Using the panel B
1. Choose an HDMI output (A, B, C or D).
2. Press the corresponding select button repeatedly to switch
between the inputs. The input indicator LED illuminates to
indicate the selected input.
Using the remote control D
1. Choose to which HDMI output (A, B, C or D) you want to switch
the input.
2. Press the corresponding select button to select the desired
input. The input indicator LED illuminates to indicate the
selected input.
Specifications
Product
Article number
Dimensions (l x w x h)
HDMI version
HDCP version
Video Bandwidth
Supported HDMI resolution
HDMI connector
Operating temperature
Relative humidity
4
1
to the HDMI inputs C
5
to the ethernet port C using an
3
to the HDMI outputs
4
to the RS-232
1
to a power outlet using
4
.
2345
HDMI Matrix
VMAT3474AT
270 x 112 x 25 mm
HDMI 2.0
HDCP 2.2
18G
1080p @ 120 Hz
4K2K @ 60 Hz (4:2:0)
4K2K @ 50/60 Hz (4:4:4)
1920 x 1080 @ 120 Hz
1920 x 1080 3D @ 24 Hz
4K2K @ 30 Hz
Type A ,19 pin, Female
°C - °C
0 - 95% (no condensation)
2