Metalux RCG4 Instructions D'installation page 4

Installation Instructions – RCG4 Recessed Grid / FES
11
LENS REINSTALLATION: Gently snap lens into the
extrusions, being careful not to push the face of the lens
past the face of the extrusions. Work down the length of
the fixture, until the entire lens is inserted. Use the Lens
Removal Tool to slide the lens to make the gaps even at
each end.
4
COOPER LIGHTING SOLUTIONS IB519097EN Installation instructions
Catalog Number
34D
56D
78D
100D
OPTIONAL ASYMMETRIC LENS: Please note direction of
light output when using optional asymmetric lens.
Maximum Continous run
Length (FT)
555
348
250
185