nedis WCACQ10W1BK Guide De Démarrage Rapide page 5

with copious amounts of water and seek medical
advice.
•
Always purchase the battery recommended by
the product manufacturer for the product.
•
Do not remove a cell or battery from its original
packaging until required for use.
•
Do not use any cell or battery which is not
designed for use with the equipment.
•
Use only the cell or battery in the application for
which it was intended.
•
Wipe the cell or battery terminals with a clean
dry cloth if they become dirty.
•
When possible, remove the battery from the
product when not in use.
•
Properly dispose of the empty battery.
•
Seek medical advice immediately if a cell or a
battery has been swallowed.
•
Always keep button cell batteries, both full and
empty, out of reach of children to avoid the
chance of swallowing. Dispose of used batteries
immediately and safely. Button cell batteries can
cause serious internal chemical burns in as little
as two hours when swallowed. Keep in mind that
the first symptoms may look like child diseases
like coughing or drooling. Seek immediate
medical attention when you suspect that
batteries have been swallowed.
Connecting to a power supply
Connect the power cable to A
Connect the USB adapter to a power outlet.
6
The indicator LED A
blinks twice to indicate
start up.
Replacing the battery (image B)
4
The battery is only used for memorizing the time,
alarm and radio settings during a sudden loss of
power. Keep the power supply connected to use
the product.
Setting the time mode
Double press the menu button A
between 12-hour and 24-hour time indication.
Setting up an alarm / Setting the time
4
1. Press and hold A
for 2 seconds to edit the
alarm time.
8
and a USB adapter.
4
to switch
• To set alarm 2, press A
time.
• To set the current time press A
third time.
4
The time and the corresponding alarm indicator
on the display start flashing.
2. Press the – button A1 and + button A
the minutes.
4
3. Press A
again to confirm the minutes.
2
4. Press A1 and A
5. Press the alarm / light button A
alarm.
4
If no input is given for 5 seconds the settings will
automatically be saved.
Setting display brightness
2
Press A1 or A to change the display brightness.
Using the alarms
3
Long press A multiple times to activate and
deactivate the alarms.
The alarm indicators A
alarm(s).
Snoozing and switching off the alarm
4
The alarm rings 3 times for 30 seconds with 10
second breaks.
Press any button on the product to switch of the
alarm.
Tap anywhere on the product to snooze the alarm.
9 q
A or A
flashes to indicate the alarm is
snoozed.
Wireless charging
Place your QI-compatible device on the wireless
5
charging area A
.
6
A
switches on.
6
A
switches off when the battery is fully charged.
Do not place foreign materials, such as metal
-
objects, magnets, and magnetic stripe cards
such as debit- or credit cards, between your
device and the wireless charger. The device may
not charge properly or may be damaged due to
overheating.
If a foreign object is detected, A
-
continuously and wireless charging is disabled.
5
4
for 2 seconds a second
4
for 2 seconds a
2
to set
to set the hours.
3
to save the
9q
indicate the active
6
will blink