Publicité
Les langues disponibles
Les langues disponibles
USING THE DEVICE
First use
NOTE!
Check that the earplugs and optical fibers are undamaged before each use. A
damaged optical fiber can harm the skin in the auditory canal.
If you need to stop the treatment when it is in progress, press the power button,
holding it down for two seconds, which switches the device off.
1.
Select suitable silicone adapters for your ears, and attach them to the
earplugs (see Figure 4). You can use earplugs without the silicone fittings
if your auditory canals are small.
2.
If necessary, place the silicone rings in the earplugs to ensure that they fit
properly. Note the asymmetrical structure of the ring. Place the ring in the
earplug such that it rests against the ear lobe. (See Figure 5)
3.
Connect the wires to the holder, and adjust the wire loop's length as
required (see Figure 6).
4.
Lift the wire loop over your head, and place the earplugs carefully in your
ears, with the loop over your neck (see Figures 7 and 8).
5.
Switch on the device (see Figure 9). First the device beeps and the green
indicator lights starts to flash. Finally the device beeps twice and switches
off automatically.
If the device does not switch on or if the orange indicator (C in Figure 3) is
blinking, recharge the device as instructed in 'Recharging'.
44
Figure 4.
Figure 5.
Figure 7.
Figure 8.
USING THE DEVICE
Figure 6.
Figure 9.
45
Publicité
Chapitres
