Fein AStx649-1 Mode D'emploi page 16

OBJ_BUCH-0000000076-003.book Page 16 Monday, September 23, 2019 9:51 AM
en
16
Switching on with lock-on function:
Press the safety lock and the On/Off switch
(I) at the same time.
Release the On/Off switch first, and then the
safety lock.
Switching off when locked on:
Press the On/Off switch and then release it
().
Using the recommended clamping devices (figure 7).
Pipe clamp 9 07 02 001 00 1
For pipes with diameters to 159 mm, use the
pipe clamp 9 07 02 001 00 1.
– Place the clamping chain around the work
piece and insert the hooks of the grabber
in the clamping chain.
– Tension the chain with the pipe-clamp
handle.
– Mount the hacksaw to the retaining bolt.
The clamping head is readjustable for saw cuts
and can be used for angle cuts.
1.
3.
2.