Display Indicators; Replacing The Battery - switel BH312 Mode D'emploi

Thermomètre numérique à pointe flexible
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6

Display indicators

1
Unit of measurement
(°C or °F)
2
Battery icon
3
Memory icon
7

Replacing the battery

If the information in the display has a poor contrast or the battery icon ap-
pears, the battery charge capacity is low: Change the battery.
1.
Pull off the battery compartment cover.
2.
Pull the battery compartment out (approx. 1 cm).
3.
Remove the battery.
4.
Insert a new battery. The flat side of the battery must face upwards (+).
5.
Slide the battery compartment back in.
6.
Press the battery compartment cover on until it audibly snaps into place.
8
Setting the unit of measurement
The temperature measured can be displayed in degrees Celsius or degrees
Fahrenheit.
When the thermometer is switched off, press and hold the On/Off button.
1.
The icon at the top right of the display alternates between °C and °F.
Release the On/Off button when the unit of measurement you want is dis-
2.
played.
Press the On/Off button to switch the thermometer off.
3.
4
Display of values or information
5
Measured value < 32 °C
(unit of measurement flashes)
6
Measured value > 42 °C
23

Publicité

Table des Matières
loading

Table des Matières