Product Features; Input Panel - Power Dynamics 178.850 Mode D'emploi

PRODUCT FEATURES

General
- Professional & sturdy ABS enclosure;
- Enclosure and baffle are molded of tough and durable co-polymer material. This range of
speakers is able to withstand high powered impacts;
- A heavy-duty, perforated metal grill protects the woofer;
- Ergonomically designed balanced handle and lightweight enclosure for easy and
comfortable carrying;
- Attachment points for wall or ceiling mount brackets;
- Integral 35mm pole mount receptacle with securing thumb screw.
About the enclosure
The enclosure and baffle of this range of speakers are made of polypropylene co-polymer. The use of
co-polymer allows features such as stand mounting sockets, handholds, ports and high frequency
horns to be molded directly into the cabinet. Not only do you get contemporary appearance, you also
get lots of functionality.

INPUT PANEL

1. Volume control for CH-1
2. Volume control for CH-2
3. Master volume control.
4. Tone control
5. Bass control
6. Balanced input connector CH-1 (XLR or 6.3mm Jack)
7. Line input CH-2 for audio input source e.g. mixer, CD player, etc.
8. Balanced output connector (line out). For connetion a second active speaker
TROUBLESHOOTING
One certain method of determining if a speaker is faulty is to substitute a speaker that is known to
work correctly for the suspected problem speaker. If the "normally correct speaker" is experiencing the
same difficulties or problems as the suspected problem speaker, use the information below to isolate
the problem.
No output
Possible cause
Speaker cables
Intermittent
Possible cause
Poor connections
box.
Action
Reseat all connectors
Inspect cable for damage
Inspect wire or connector for stray strand that may short
Action
While it is possible for a faulty speaker to exhibit intermittent output, it's more
likely that an output cable/connector is the problem.
Reseat all connectors
7 - 20