Important Safety Instructions - Hoover IRONspeed SFD4102 Mode D'emploi

Introduction

Important Safety Instructions

3 - 3 - GB
Ironspeed_SF__1-12_union.indd 3
Dear customer,
Congratulations on the purchase of your new Hoover ironing system. This appliance
has been manufactured to the highest standards. Used correctly, your Hoover ironing
system will delivery many years of quick, hassle free ironing.
Before using your new Hoover appliance, please take the time to read this user
manual carefully. If you need further information or if you encounter any issues
which are not dealt with in this manual, please contact your local dealer.
Please read this user manual carefully before your first use and save it for future
reference.
• This product has been designed for domestic use only. In case of any commercial
use, inappropriate use or failure to comply with the instructions, the manufacturer
is not responsible and the guarantee will be invalid.
• Before connecting your appliance, check if the main voltage is the same as the
voltage indicated on your appliance and that the power outlet is connected to the
earth.
• Ensure before each use that the electric cord or any other important part is not
damaged.
• This appliance is not indented to for use by children or persons with reduced
physical, sensory or mental capabilities, unless they are adequately supervised in
its operation and use by an adult responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• The iron must be used and placed on a flat and stable surface. When you replace
the iron on its stand, make sure that the surface on which you place it is stable.
• Never direct the steam towards persons or animals. Never direct the steam jet
towards any other electrical or/and electronic appliances.
• Do not use the appliance if it has fallen down, or if the appliance shows evidence
of breakdown, malfunction, leakages. Please have the product checked by
authorized Service Centre to avoid any danger.
• Always make sure the appliance is switched off, unplugged and cooled down
before doing any maintenance work.
• Never leave the appliance unattended when plugged in and before it has cooled
down.
• Do not unplug the appliance by pulling on the cord or on the appliance.
• Never immerse the iron, the stand, the cable or the plugs in water. Never hold
them under the water tap.
• The soleplate of the iron can become extremely hot and may cause burns if
touched. Never touch the electric cords with the soleplate.
• If the supply cord is damaged, it must be replaced by the manufacturer, service
agent or similarly qualified persons in order to avoid a hazard.
19-10-2009 17:57:51