Ce Declaration Of Conformity - claber Rotoroll EVOLUTION 20 Mode D'emploi

Maintenance
WARNING Never open Rotoroll.
Risk of injury. Any repairs must
be performed by an authorised
support centre only.
EMPTYING
Before putting Rotoroll away, make sure
that all of the water in the hose has been
completely drained away. To do this, pull
the hose out fully, keeping the adjustable
nozzle open.
REMOVAL/STORAGE
WARNING
Rotoroll from the wall support,
make sure that you/the user are/
is able to sustain the weight
(8696: 8,5 kg; 8697: 12,5 kg).
Remove Rotoroll by unthreading the pin
from the wall support (Fig. E).
During winter, store Rotoroll in a place
where it is protected from frost/freezing
(Fig. F).
10
8696_8697_Rotoroll_evolution.indb 10
Before removing
UK - 3

CE Declaration of Conformity

We hereby declare that the device
described below, based on its design,
construction type and the model we
released onto the market, complies
with the essential health and safety
requirements of the EC directives. If any
changes are made to the device without
our consent, this declaration is no longer
valid.
Product: Rotoroll Evolution
Model: 8696 Rotoroll Evolution 20m
8697 Rotoroll Evolution 30m
Relevant EC directives:
2006/42/EC (+2009/127/EC)
Applied harmonised standards:
EN ISO 12100
Applied national standards:
-
Fiume Veneto, 16/11/2017
CEO of Claber S.P.A.
Mr Gian Luigi Spadotto
19/12/17 14:28