Fagor Tedi 4000 HD Mode D'emploi page 20

8.4.-
F CTORY RESET
It allows you to restore the unit to its default factory
G
settings. When you select this option, you will be asked
to enter your password (or default password "2468").
Press OK to resume the unit to factory default settings.
8.5.- UPGR DE
If you want to Upgrade the software, please contact Fagor.
G
Caution: Please don't cut off the power when you are
upgrading the software.
8.6.- VERSION
Via menu (MENU setting
G
software version.
9.- V
Video output mode can change the mode of video output,
G
you can adjust TV mode according to the actual situation
of you receiving equipment.
You can modify: Contrast, Brightness, Saturation, Hue,
G
Aspect ratio and Video output.
Move the cursor to the corresponding option to be
G
adjusted and press OK / Right key to display the available
settings, and then press UP/DOWN key to move circularly
and choose the desired option. Press OK key to save the
settings.
Version) to check the
20
VIDEO RESOLUTION
Below are the available options you can adjust under
G
Video resolution : Auto Detect /
720p_50, 1080i_50, 1080p_50
HDMI UDIO
Below are the available options : HDMI Mute; HDMI PCM,
G
HDMI RAW.
10.- MULTI-MEDI
This product is compatible to play the MP3, JPEG and
G
MPEG files. It can support only the files displaying in the list
and the file format this product is compatible with.
Insert USB external device into the USB port compatible
G
of the decoder.
Press SOURCE key to enter into the Multi Media menu.
G
Press EXIT key to return to previously viewed TV program
G
and exit the Multi Media menu.
MEDI SELECTION MODE
Use the "LEFT" or "RIGHT" key to select the music /
G
photo / movie...etc. playback mode. Then press "OK"
to enter the file list.
576p_50, 576i_50,