The Cyclone Feed System - Tippmann X7 Phenom Manuel D'utilisation

The Cyclone Feed System

This diagram presumes that you have already removed the Cyclone Feed System from the
marker as instructed on pages 18 and 19.
1. Remove the Screw (19) and Washer (22) to remove the Feeder Sprockets (20 and 21).
2. Remove four Screws (19) from the Feeder Bottom Plate (18).
3. The feed drive parts are now accessible for inspection or repair.
4. Reassemble in the reverse order.
29
E
N
G
L
I
S
H