Storage; Phenom Disassembly And Assembly - Set Up A Work Area - Tippmann X7 Phenom Manuel D'utilisation

Storage

Before storage, unload the marker (page 12) and remove air supply (see page 15). Then put
the Selector Switch in Safe mode (see page 6) and install the barrel sleeve (see page 4).
Store your marker in a dry area.
When removing your marker out of storage, make sure the Selector Switch is in Safe mode
(see page 6) and the Barrel Sleeve is installed (see page 4).

Phenom Disassembly and Assembly - Set Up a Work Area

Set up a workbench with plenty of workspace to make sure no small parts become lost.
Follow these safety instructions at all times when disassembling or re-assembling your
Phenom marker.
1. First follow
Unloading Your Marker
instructions on page 15.
2. Always wear eye protection when performing any marker disassembly or re-assembly.
3. Do not pressurize a partially assembled paintball marker.
On the pages that follow, the parts illustration and part number list are on the left hand (even
numbered) pages. Instructions for disassembly and re-assembly are on the right hand (odd
numbered) pages.
on page 12 and
Air Supply Cylinder Removal
17
E
N
G
L
I
S
H