Before First Use; Attaching And Removing The Blending Attachment; Using The Appliance - Sencor SHB 332 NAA1 Série Manuel Utilisateur

SHB 332XXX-NAA1/SHB 3320WH-NAA1/ SHB 3321BL-NAA1/ SHB 3322GR-NAA1/ SHB 3323OR-NAA1/SHB 3324RD-NAA1/
SHB 3325VT-NAA1/SHB 3326YL-NAA1/ SHB 3327TQ-NAA1/ SHB 3328RS-NAA1

BEFORE FIRST USE

1. Take the appliance and its accessories out of the packaging materials.
2. Thoroughly wash the removable blending attachment A5 and the
and detergent. Thoroughly rinse these parts with drinking water and dry thoroughly.
Attention:
3. Make sure that no water remains in the blending attachment A5, which could enter into
the motor unit A4 when the appliance is assembled and cause damage to it.

ATTACHING AND REMOVING THE BLENDING ATTACHMENT

1. Place the blending attachment A5 against the motor unit A4 and attach it by turning it in the
direction of the closed padlock symbol marked on the appliance.
1. To disassemble the blender, use one hand to hold the motor unit A4 and the other to turn the
blending attachment A5 in the direction of the open padlock symbol marked on the appliance and
take it off.
B

USING THE APPLIANCE

1. This blender is designed for blending spreads, mayonnaises, fruit- or milkshakes, sauces, baby food,
purée, etc.
2. Place the ingredients that you wish to blend into the
3. Connect the power cord to an el. power
submerge the blending attachment A5 into the container with the ingredients.
4. To turn on the blender, press switch I A2 or II A3. The blender will run while switch I A2 or II A3 is
pressed. For safety reasons the blender will turn off when switch I A2 or II A3 is released.
2014
Hand Blender
. Hold the blender by the motor unit A4 and
EN-6
A7 with hot water
A7 or another suitable container.
10/2014