ALPATEC PI 112 EH Mode D'emploi page 11

notice_PI242_ 29/05/07
- Unplug the appliance before any cleaning operation.
- Do not place the appliance in hot, humid or fire gases environment.
- Do not use chemical solvent to clean the surface of the appliance. If you do so, the surface will be
scratched, damaged even the whole casing could become deformed.
- Clean the pre filter every 2 months with water and soft chemical, then replace it when it is dry.
- The longevity of the filters depends on the intensive use of the appliance and the degree of air pollu-
tion. It should be replaced every 6 months. If the filter is black, it need to be replaced.
TROUBLES
The appliance does not work
The fan does not run.
10:44 Page 11
MAINTENANCE
MAINTENANCE
MAINTENANCE
MAINTENANCE
TREATMENT
Check the appliance is plug.
Press M/A touch.
Check filters and rear cover are correctly installed.
Make sure there is nothing in front or on top of air grid.
Check the filters and replace them if necessary.
11