Format Microsd Card; Insert Microsd Card; Motion Detection - AKASO B60 Mode D'emploi

④ Enter the Smart Life app account and password, then tap "Link Now" to link your
Smart Life account. Choose the room where your device is located, and then the
skill will appear on the Home Control Devices list. Now you can begin your smart
home journey.

INSERT MICROSD CARD

Insert MicroSD Card
13

FORMAT MICROSD CARD

MicroSD Card and Cloud Storage can be selected, support 2-128GB card with
Class 10 or above. In order to make sure the card more compatible with the camera,
please format it firstly on computer as FAT32, then format it again in camera after
inserting the card. After finishing, the camera will start to record. Please format as
per the below:
① Open "Smart Life" to enter into the main interface, click camera icon to enter
intor the live view interface.
② Click on the right top to enter into the more setting, click "Storage Settings →
Format → OK" to format the card, please see below:
2020-04-20 13:51:48
AKASO camera HD
Screenshot
Playback

MOTION DETECTION

When the motion is detected, an alarm message with snapshot will be sent to
message center on the mobile phone, at the same time you will hear alarm sound.
① Motion Detection Alarm Setting: Click
setting, click "Motion Detection", turn on it and select the level of sensitivity.
Settings
AKASO camera
Device Name AKASO camera
Signal: 91%
Share Device
Device information
Use Echo
Basic Feature Settings
Decibel Detection Settings
Motion Detection
Purchase VAS
Speak Record
Storage Settings
FAQ & Feedback
Firmware Information
Cloud storage Alarm
Remove Device
on the right top to enter into the more
Off
Medium
14