Specifications - Tippmann X7 Phenom Manuel D'utilisation

E
The Cyclone Feed System (refer to Figure 17)
N
These instructions presume that you have already removed the Cyclone Feed System from
G
the marker.
L
1. Remove the
I
86).
S
2. Remove four
H
3. The feed drive parts are now accessible for inspection or repair.
4. Reassemble in the reverse order.

Specifications

Model ................................................................................................TIPPMANN
Caliber ................................................................................................................................. .68
Action .....................................Semi-Automatic (Open Bolt Blow Forward Spool Valve System)
Power (Electro-pneumatic model) .............................................................................9V Battery
Air Supply ............................................................................. compressed air, nitrogen, or CO2
Hopper Capacity ..................................................................................................200 Paintballs
Ball Feed .............................................................................TIPPMANN Cyclone Feed System
Feed Rate ........................................................................................... 20 paintballs per second
Firing Rate .......................................................................................... 15 paintballs per second
Trigger (Electro-pneumatic model) .................................................. Mechanical and Electronic
Trigger (Mechanical model) ..................................................................................... Mechanical
Standard Barrel Length ....................................................................................... 9.5" / 24.1 cm
Length (with standard barrel, no air supply cylinder) ..................................... 19.75" / 50.17 cm
Effective Range ................................................................................ 150+ feet / 45.72+ meters
Weight (without air supply cylinder) .................................................................3.92 lbs / 1.8 kg
Finish ......................................................................................................................Black Nickel
Velocity ......................................................................................................................Adjustable
Always measure your marker's velocity before playing paintball and never shoot at velocities
in excess of 300 feet (91.44 meters) per second. See
page 9.
(36) and
Screw Washer
(36) from the
Screws
(88) to remove the
Feeder Bottom Plate
Velocity Adjustment
24
(87 and
Feeder Sprockets
(85).
X7 Phenom
®
instructions on
®