Operation Method - Gree GDN20BD-K5EBA1A Mode D'emploi

Operation Method

Bucket Full
Indicator
Wind Direction Indicator
Filter Cleaning
Indicator
Notes:
● Water bucker must be correctly installed for operation.
● Do not remove the bucket while unit is
● If you want to use drain hose to drain water away, please install the hose acc-
ording to section "Drainage method".
● Each time pressing the effective button on the control panel will give out a
"beep" sound.
● When power is connected, power indicator on the control panel will be on and
Basic Functions of the Buttons
1
ON/OFF Button
2
Fan Button
Press Fan button can set high, medium or low fan speed. When the
corresponding indicator is on, it indicates the current fan speed has been set.
3
Timer Button
Press Timer button to set timer on or timer off. The timer can be set in 1h
increment among 0-24h with each press of Timer button. If hold the Timer
button, time will increase rapidly circularly. After timer is set, time will be
displayed for 5s and timer indicator will be on.
Dehumidify Mode
Indicator
Display Window
6 5
Timer Indicator
Speed Indicator
4
3
in operation.
6
1
2