Alerts (Cv Models); Time Out During Water Filling; Time Out During Drink Production - Fiamma PRESTIGE ECC Manuel D'instructions

Prestige: Unscrew the 2 screws on the upper part of the side panel and take out the springs.
Take off the right side panel in order to access the pressostat, the safety thermostat and the heating
element.
Take off the left side panel in order to access the manometer, the electronic unit, the water gauge, the
motor and the pump.
The lower tray is not fixed to the machine's body. Take out the tray in order to access the motor block, the
main switch and the volumetric counters.
Prestige: The upper tray is fixed to the machine's body with a screw in the middle of the tray. Loosen the
screw in order to take out the tray. Extract the upper tray in order to access the groups, keyboards and the
switches.
Prestige: The upper tray is fixed to the machine's body with 4 screws that also fix the side panels.

8. Alerts (CV models)

8.1.

Time out during water filling

When the water level sensor in the boiler doesn't detect water, the machine automatically starts the
water filling. The counter controls the duration of the water filling. If the filling takes longer than the
preprogrammed time (TIME OUT), the machine automatically interrupts the filling. All LEDs on the
keyboard blink as alert. In order to deactivate this alert, switch off the machine and switch it on again.
8.2.

Time out during drink production

When the machine produces a drink with a pre-programmed portion (keys 1-4), a volumetric counter
measures the water volume used for the drink production with electronic impulses. If the counter does
not receive any impulse for more than 5 seconds, the LED on the key that corresponds with the selected
drink starts to blink (but the production continues). If the counter still does not receive any impulse for
more than 1 minute, the drink production is automatically stopped..
Prestige ECC Espresso Coffee Machines by fiamma - Operating Manual - 30/09/2015
ENGLISH
25