Turntable Installation - Alpha SF-7648 Mode D'emploi

ENGLISH
•
To keep the microwave oven at a distance from the wall, it is necessary to install a distance limiter.
Hole A
Clasp C
Clasp B
Hole A
Clasp A
Push Distance Limiter
in this direction
Secure Clasp A to Hole A
1. Push Distance Limiter in the given direction
2. Make sure clasp A is secured to whole A
3. Insert clasp B and clasp C into their respective square wholes
TURNTABLE INSTALLATION
•
Remove all packing material and accessories. Check the
oven for any damage such as dents or broken door. Do
not install if oven is damaged.
•
Do not remove the light brown Mica cover that is
attached to the oven cavity to protect the magnetron.
•
Never place the glass tray upside down. The glass tray
should never be restricted.
•
Both glass tray and turntable ring assembly must
always be used during cooking.
•
All food and containers of food are always placed on
the glass tray for cooking.
•
If glass tray or turntable ring assembly cracks or breaks,
contact your nearest authorized service center.
OPERATION
Control Panel, Features & Operation
•
Connect the cord.
•
Place the food microwave container and place on
glass.
•
Select your desired function from menu
•
Set the timer. If you set the time make sure it is
not less than 2 minutes, first turn the timer to
over 3 minutes position and then turn back to
your desired time.
•
The microwave oven will automatically start cooking
after power level and time are set.
•
When the cooking time is done, the unit will "Dong"
to stop.
Caution: When removing food from the oven, please
ensure that the oven power is switched off by turning the
timer switch to 0 (zero). Failure to do so, and operating the
microwave oven without food in it, can result in
overheating and damage to the magnetron.
Hub (underside)
Glass tray
Turntable shaft
Turntable ring assembly
Timer
Power
3
Distance Limiter