Jlpt1: Parallel Port Connector - MSI Z97 GAMING 3 Manuel D'instructions

JLPT1: Parallel Port Connector

This connector is used to connect an optional parallel port bracket. The parallel port
is a standard printer port that supports Enhanced Parallel Port (EPP) and Extended
Capabilities Parallel Port (ECP) mode.
M2_1: M.2 Port (optional)
The M.2 port supports either M.2 SATA 6Gb/s module or M.2 PCIe module.
Important
• The SATA5 and SATA6 ports will be unavailable when installing a module in the
M.2 port.
• Intel RST only supports PCIe M.2 SSD with UEFI ROM, does not support Legacy
ROM.
• M.2 PCIe interface does not support RAID 0, RAID1, RAID 5 and RAID 10.
En-23