Functional Description - Dustcontrol DC AirCube 500 Traduction Des Instructions De Service D'origine

Inspection
Regularly check the device for damage and wear. Any damage must be rectified by a
Dustcontrol authorized service center.

Functional description

The DC AirCube air cleaner is designed for cleaning the air in a workplace. The
machine is used as a complement to spot extraction. The air is circulated through a
pre-filter and a HEPA filter. The HEPA filter has an extremely high degree of
separation and in practice separates all airborne dust particles that go through the
filter.
In case of reduced suction, the pre-filter must be replaced. If the suction performance
does not increase after the pre-filter replacement, replace the HEPA filter.
The fan has two speed settings which allows for economical operation, for example
during the night.
The DC AirCube 500, 1200 and 2000 can be used to evacuate air from a space where
you want to create a negative pressure by connecting the outlet to an evacuation
hose.
Without accessories, the machine is designed for use in an upright position to
minimize dust whirling from the fan outlet.
The DC AirCube 500 has an electrical socket for 240 V, 1200 W.
DC AirCube, Art.nr. 94178-E 27