Intermec EasyCoder 7422 Manuel D'utilisation page 71

Replacing the
The printer contains memory for storage of
Printer Memory
operating parameters, forms, graphics and
Backup Battery
soft fonts. A battery prevents memory loss
if the printer power is switched off or
disconnected. When the battery is
exhausted, the printer will print "LOST
INTERNAL INFO". If this happens, turn
off the printer power and follow the steps
below to replace the battery.
Step
With the printer power off, open the cover
and remove any labels that may be loaded.
Step
Remove the four (4) screws that secure the
label cradle and lift off.
See Warning on page x
WARNING
Operation
Remove 4 Remove 4
Screws Screws
Battery
55