Configuration Of The Display Terminal "Setup; Terminal Configuration / Setup - Bartec BAT VGA pro Manuel D'installation

Operator´s manual for BAT VGA pro
Version 1.1
5.

Configuration of the display terminal "setup"

5.1

Terminal configuration / setup

When the power is switched on the display terminal shows the following SETUP menu for 5 seconds.
Version number
Station number for the
download
SETUP is used for the basic configuration of the display terminal. For example, it enables you to download your own
programs.
Select a menu item using "
To what extent settings can be made during normal operation will depend on the installed software. The
settings possible in this SETUP are mostly very similar. See the relevant manuals and operating instructions
for help.
E_BMS00680_Rev7.doc • Operator´s manual for BAT VGA pro • Revision 7 / Status: 29. January 2004 • Technical data subject to change
Setup V2.62
> Start download <
Language
Password
Set time / date
Set Station number
System programs
[ 1]
""„ " and confirm with "Enter".
Page 5 3
12:00:00