Cleaning And Care - Korona 27010 Manuel D'instructions

Extracting Juice
1. Follow the assembly instructions.
2. Cut the lemons, oranges, etc. into half. Depending on your
taste, adjust the strainer to avoid fruit pulp ending up in your
juice.
3. Press one half of the fruit onto the pressure cone (2/3). The
appliance switches on automatically, as soon as pressure is
applied onto the cone and the extracting process begins. By
reducing the pressure on the cone, the cone automatically
switches directions and the extraction process
continues.
Note: Never exceed the max. capacity of the juice collector.
4. Once the extracting process is complete, disconnect the
appliance from the mains.
Note: To avoid damage to the appliance, never apply too much
pressure on the pressure cones.
5. Lift the juice collector (5) off the appliance, remove the
strainer (4) and pour yourself a glass of freshly squeezed
juice.

Cleaning and Care

Due to hygienic reasons clean your citrus juicer after each
use to remove fruit pulp residues
Before cleaning, always switch off the appliance and disconnect
it from the mains. Let it completely cool down. Never immerse
the motor unit (7) in water. Danger! Electric Shock!
Disassemble the appliance in reverse order as explained under
assemby of the citrus juicer and clean it as soon as possible
after use with a damp cloth. Do not use any aggressive cleaning
agents.
Instruction Manual
ENGLISH
17