Salora BTS1400 Mode D'emploi page 6

How to use
remote control:
1.
Pull the PVC insulation film out of the battery buckle before you use the remote
control, now the battery inside the battery buckle starts formal power supply for
the remote control, hold the remote control and face it to the display screen of the
host so as to effect each function of the remote control;
2. When
the remote control does not work due to running out of power after being
u
sed for a long time, open the buckle door by the method shown in below figure,
take out the old battery and replace it by a new one, pay attention to the "+/-"
direction when making replacement, push the battery into the remote control
according to the direction shown in the Figure, then the replacement is completed.
拆开电池扣门：open buckle door of the battery
关闭电池扣门：close buckle door of the battery
LED indicator light：
LED (Red): in the standby mode, the red LED indicator light flashes once every
three seconds (in the front of the machine)
LED (Blue): the blue LED indicator light flashes in the pairing process of
Bluetooth connection; the blue indicator light will remain lit after the pairing (in the
front of the machine)
5