cleAninG And MAintenAnce
1. Clean the outer surface of all parts with a damp cloth and a cleaner suitable for plastics. Make sure no
moisture gets into the appliance.
2. Over the course of time dust and dirt can accumulate around the wheel axles, thereby preventing the
wheels from turning easily. Consequently they should be kept clean.
•
Never immerse the appliance, plug or power cord in water.
•
Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
cleAninG And MAintenAnce - changing the dust bag
1. Change the dust bag immediately once the 'dust bag full' indicator turns red, see Figure 10.
It is possible that the indicator turns red whilst the dust bag is not yet full. If so, then the nozzle, hose or
tubes may be blocked. These will then need to be cleaned.
2. Open the cover by pulling the cover release (dust bag) upwards. Remove the dust bag from the holder,
and dispose of it in a dustbin.
3. Fit a new dust bag in the holder and press into position.
4. Close the cover, and press until it clicks into place.
Make sure that the dust bag does not become pinched by the cover. This could damage the appliance
and/or the dust bag.
Dust bags for this vacuum cleaner are available from every major hardware store, with a statement
of the type number Bestron D00013/D0013S
Figure 10
Changing the dust bag
28
user's instructions
Figure 9
Storing the
vacuum cleaner