Dual surface unit (right front)
The dual surface unit features inner and outer elements. You can select either
element depending on the cookware you are using.
NZ36K7570R_DG68-00822B-00_EN+MES+CFR.indb 19
2. To set and adjust the power level,
run your finger clockwise or
counterclockwise along the surface of
the element's control.
•
If you do not set a power level after
selecting an element, the element will
turn off automatically after 10 seconds.
•
If you have attached the magnetic knob
to the element control, grasp and turn
the magnetic knob within 10 seconds.
1. To select the cooking zone, touch the
corresponding cooking zone's selector.
•
The digital displays will show
.
2. To select the pan size, touch the Pan
Size key.
When the
indicator turns on, the unit
operates in Dual mode.
3. To set and adjust the power level,
•
•
Triple surface unit (Center)
The triple surface unit features 3 different heaters so that you can select any
heater depending on the size of the container to use.
1. For selecting the cooking zone, touch
•
2. For selecting the pan size, touch the Pan
3. For setting and adjusting the power
•
run your finger clockwise or
counterclockwise along the surface of
the element's control.
If you do not set a power level after
selecting an element, the element will
turn off automatically after 10 seconds.
If you have attached the magnetic knob
to the element control, grasp and turn
the magnetic knob within 10 seconds.
the corresponding cooking zone's
selector.
The digital displays will show
.
Size key. When the
indicator turns on,
the unit operates in Dual mode. When
the [ ] indicator turns on, the unit
operates in Triple mode.
level, rotating the magnetic knob.
If no key is entered after a burner
is selected, the burner will turn off
automatically after 10 seconds.
English 19
7/14/2016 5:22:10 PM