Rohm F-senso KLEIN Manuel D'utilisation page 16

Mounting the SK adapter
Measuring taper
Adapter
connection thread
end face
1. Put the measuring taper on the base unit.
2. Screw the tension bolt onto the base unit.
3. Tighten the tension bolt on the base unit with the mounting bar until it is finger
tight.
Mounting the HSK adapter
Spacer
1. Put the spacer on the base unit.
2. Screw the measuring taper onto the base unit.
3. Tighten the measuring taper on the base unit with the mounting bar until it is
finger tight.
Heinrich-Röhm-Str. 50, 89567 Sontheim/Brenz., GERMANY, Tel. (49)7325/16-0
Operation
Tension bolt
Measuring taper
Mounting bar
Mounting bar
6