Forno Venetzia PRONTO 500 Guide De Montage page 6

1 – Chimney Cap
1 – Chimney Pipe
1 – Retractable Oven Tool Holder
1 - Handle
1 – Oven Body
1 – Oven Door
1 – Folding Shelf
1 – Middle Shelf
4 – Legs
1 – Base with wheel brackets
2 – Swivel Wheels
2 – Fixed Wheels
3. Carefully remove the laser film protective covering. Avoid using sharp or metal objects as to
not damage the finish of the oven.
4. Position the polystyrene packaging on the floor and place the parts on it to avoid scratches.
**CAUTION – AS THE OVEN IS HEAVY SOME STEPS REQUIRE TWO PEOPLE TO PERFORM THE
ASSEMBLY**
5. Attached the 4 legs to the base with the wheel brackets. Ensure the legs with the holes for
the handle are both on the same side. Start by positioning two legs on the polystyrene and
attach the base. Turn the now partially assembled cart a ¼ (quarter) turn and attach the third
leg. Turn one more time to attach the last leg.
6. Turn the partially assembled cart upside down and attach the 2 swivel wheels to the same
side as the legs with the holes for the handle.
7. Attach the 2 fixed wheels to the remaining side.
4