Accessories; Ex-Data; Ex-Rsm Aurelis Bt; Nec & Cec - Ecom Ex-RSM Aurelis BT Instructions De Service

• It must be ensured that the device is not taken into zones 0 or 20.
• In IIC (Zone) hazardous areas the applicant has to ensure that the Metal
Part of the Belt Clip is electrostatically earthed, e.g. by the use of ESD
clothing.
• The belt clip shall only be installed outside of the hazardous areas.
• The belt clip shall not be removed from the device inside hazardous areas.
• The battery module may only be charged outside the hazardous areas and
only by using safety box 'SB01' in between the power plug and the device.
• For charging first connect the safety box "SB01" to the Ex-RSM Aurelis
BT, then connect the safety box to an USB-A socket. If done differently, the
safety box may get harmed.
• The battery module may only be charged in a temperature range of 0-45°C
Only valid for model Ex-RSM Aurelis BT
• It must be ensured that the device is not taken into zones 0 or 20!
Only valid for model Ex-RSM Aurelis BT Gb
• It must be ensured that the device is not taken into zones 0,20,21 and 22!

3.2 Accessories

Only the following headsets are allowed to connect to the Ex-RSM Aurelis*:
Ex-TRA PTT-E
Ex-TRA PTT-EH
EX-TRA NB
Ex-TRA VT

4. Ex-Data

4.1 Ex-RSM Aurelis BT

4.1.2 NEC & CEC
Ex-Marking:
Ambient temperature: -20°C ≤ Ta ≤ +50°C
Approved for Division 1 and 2 Class I,II,III
4
Ex-TRA FTS
Ex-TRA FT
Ex-TRA ComCom
Class I, Division 1, Groups A-D T4
Class II, Division 1, Groups E-G T4
Class III, Division 1