INFOSEC UPS SYSTEM E6 LCD RT Evolution Manuel De L'utilisateur page 14

3-7-2. Operation menu
3-7-2-1. Main menu
1) After pressing the "UP" or "DOWN" button at the home page, it will display five items in operation menu: Control /
Measurement / Information / Setting / Alarm.
2) Press "UP" or "DOWN" button to select item;
3) Press "ON/ENTER" button to confirm the selection;
4) Press "OFF/ESC" button to return back to home page;
5) This operation is same or similar in other menu or page. Please refer to the section of "Button Operation".
3-7-2-2. Control
NOTE 1: Usually, all these four items could be seen on this interface except for "Para Unlock". "Para Unlock" appears only
when parallel communication failure happens.
NOTE 2: "Turn On" will be displayed if UPS is not turned on. "Turn Off" will be displayed if UPS is turned on. Generally
speaking, these two messages will not be displayed at the same time or in all operation modes.
1) Turn On/Turn Off
This item is for turning on/off the UPS;
a) On Bypass mode, it will display "Turn On" in control menu. If it is selected and confirmed, the UPS will transfer to
AC mode or converter mode or ECO mode or battery mode according to the setting and input status.
NOTE: You may simply turn on UPS by pressing "ON/ENTER" button in home page. It's not necessary to enter control menu
to turn on the UPS.
b) On AC mode or converter mode or ECO mode or battery mode, it will display "Turn Off" in control menu. If it is
selected and confirmed, the UPS will transfer to bypass mode or shut down.
NOTE: You may simply turn off UPS by pressing "OFF/ESC" button in home page. It's not necessary to enter control menu
to turn off the UPS.
14
→
→
INFOSEC UPS SYSTEM - 4, rue de la Rigotière - 44700 Orvault - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr –
→
→
→
XX 05 XX 16 XX AA XX 59 XX205 03