Canvas FHWS80023A Mode D'emploi page 9

16 Product No. 085-1572-0 | Model No. FHWS80023A
Step 1
H, L, AA, BB, CC
Requires Pieces:
Place the granite table top (L) on a soft, flat surface. Insert the bolt on the table
top (L) with the corresponding bolt holes on the base (H). Insert the Φ24*Φ8.4*2.0
mm washer (BB) and M6 nut (AA), tighten the nut using the wrench (CC). Turn the
table right way up.
Step 2
A, H, I, L
Requires Pieces:
Add the glass beads (I) to the fire pit bowl. Ensure the pilot housing (D) is not
covered by the beads. Gently pull out the door using the knob. Place the lid (A) over
the burner bowl (B).
AA
BB
L
A
I
L
Step 3
Requires Piece: H
Inserting LP Gas Tank
WARNING: Make sure LP gas tank valve is closed.
1. Loosen LP gas tank retainer bolt by turning counter-clockwise.
2. Place precision-filled LP gas tank upright into the hole of the fireplace base so
the tank valve is facing the gas line connection.
3. Secure tank by turning LP gas tank retainer bolt clockwise until tight.
Note: Gas tank is sold separately.
H
Step 4
Requires Pieces:
Insert the included battery (K) and switch knob (E) into the flame igniter (K)
and twist the button cover on. Do not over-tighten.
WARNING: Battery may contain mercury. Do not throw battery into the fire. Battery
must be disposed of and recycled properly as hazardous waste.
H
E, F, K
E
F
K
17
H