Safety Principles; Installation; Packaging Contents - GAM R Série Mode D'emploi Et D'entretien

01.04

Safety Principles

BEFORE TURNING ON THE MACHINE
Â
,
ARISE
THAT THE PEOPLE CONCERNED KNOW AND ADHERE TO THE CONTENTS OF THE MANUAL
DURING PHASES OF RESEARCH OR REMOVAL OF ANY CAUSE OF DAMAGE OR INCONVENIENCE
Â
CONCERNING THE MACHINE
PEOPLE OR THINGS
ELECTRIC NETWORK
AT THE END OF ANY INTERVENTION THAT REQUIRES THE REMOVAL OR THE NEUTRALIZATION OF ANY
Â
COMPONENT CORRELATED TO SAFETY
THE PUTTING BACK INTO OPERATION ENSURING THE CORRECT POSITION AND EFFECTIVENESS
IT IS ABSOLUTELY FORBIDDEN TO NEUTRALIZE
Â
INEFFICIENT
MACHINE
PERFECT CONDITION AND WORKING ORDER
02

INSTALLATION

02.01

Packaging Contents

On delivery, this Manual for the Use and Maintenance containing the Declaration of Conformity of the
product with the EC regulations, isattached to the machine and considered an integral part of it.
The machine arrives in a single package ready for use. Take care to handle the box only manually,
always keeping it in an upward position as indicated on the box.
NEVER LIFT THE PACKAGE USING A FORK LIFT
Â
02.02 Connections
Before positioning the Machine, ensure that the bearing surface is a horizontal level. If the electric
Pedal control is present, insert its plug in the correct appropriate socket to be found at the side of the
machine.
Connect the machine to the electric power supply, then:
¡ ensure that the tension and frequency of the power supply corrispond to that written on the plate;
¡ ensure that that socket is connected to earth.
The Manufacturer specifies that the mains line should be equipped with safety devices by a differential
switch, coordinated with the general earth installation, in conformity with the local and national laws.
Check that the safety devices of the Machine are present and assembled before activating the
machine.
EVERY OPERATOR IS OBLIGED TO CAREFULLY READ THE INSTRUCTIONS FOR USE
,
TAKE ALL NECESSARY MEASURES TO PREVENT ANY DAMAGE TO
.
REMOVE THE ELECTRIC TENSION
)
BEFORE APPROACHING THE PROTECTIVE DEVICES
,
ANY PART OF THE SAFETY DEVICES
,
WHEREVER POSITIONED
,
AND EVERY TIME A DOUBT ABOUT ITS WORKINGS SHOULD
(
SEPARATION OF THE MACHINE FROM THE
( ,
BARRIERS SENSORS
, ,
REMOVE MODIFY OR IN ANY OTHER WAY RENDER
,
PROTECTIVE DEVICES
.
ALL THE PROTECTIVE AND SAFETY DEVICES MUST BE KEPT IN
.
.
.
, , .),
PROTECTIONS ETC CARRY OUT
,
OR CONTROLS OF THE
.
ENSURE
.
Pagina 20