ALPATEC RSB 2005 Mode D'emploi page 6

Notice RSB 2005 18/01/07
2- Running light
indicator
1- Power and fan
setting control
4- Grid
Voltage
Power
Frequency
- Place the appliance on a level surface.
- Plug the appliance.
- Turn the selector (1) clockwise and use the visual mark to select the desired run-
ning mode. Set the desired power : function "
power I (1000 W) or power II (2000 W).
- To set the heating power of your appliance, turn the thermostat clockwise. Use the visual mark to select
the desired temperature.
- The operating light indicator lights when the appliance is in use.
- To switch off the appliance, turn the power control switch on O position.
20:51 Page 6
MAIN ELEMENT
MAIN ELEMENT
SPECIFICA TIONS
SPECIFICA TIONS
230 V
1000-2000 W
50 Hz
USE
USE
" (only the fan function works),
6
7- Visual mark to select the running
mode or to adjust the thermostat.
3- Adjustable thermostat
6- Handle
5- Wall hanging
Ex : The power II is
sélected
Ex : Le thermostat is on
minimum position