AmazonBasics B000S6N026 Mode D'emploi page 4

Assembling the shredder
Your shredder will operate only when assembled correctly and
with the wastebasket correctly placed in the shredder cabinet. Be
careful not to place your fingers near the cutter blades.
To assemble: See Fig 1
1. Carefully turn the shredder cabinet upside down on a flat
surface.
2. Insert the two locking casters into the front holes of the
shredder cabinet, then press firmly until they snap into
place (A).
3. Insert the two non-locking casters into the rear holes, then
press firmly until they snap into place (B) .
4. Carefully place the shredder into the upright position on a
level surface.
5. With the wastebasket removed from the shredder cabinet,
position the shredder head over the cabinet, then firmly
push down on the four corners of the shredder head to lock
it into place (C) .
6. Slide the wastebasket into the shredder cabinet (D).
7. Plug the power cord into a wall outlet.
4