Indication For Use; General Warnings - Cuda Fiberoptics LIT051CUDA Mode D'emploi Et Manuel D'entretien

1. INDICATION FOR USE

Congratulations on the purchase of your new Headlamp system.
This fiber optic headlamp system is designed to deliver illumination from a high intensity
light source for surgical site illumination. This Operator Manual will help you to install the
device and optimally integrate it with other components of your system. It will also
instruct you how to make adjustments, cleaning, maintenance and service guidelines as
well as recommendations for best performance results.
2.

GENERAL WARNINGS

• The user of this product should be thoroughly familiar with the use and care of this
product.
• The user should carefully study the manual before making any attempt to use this
product clinically.
• Follow the instruction in the operating manual of other manufacturer's equipment
when used with this product.
• Before each procedure carefully inspect the fiber optic cable to insure the proper
maintenance and sterilization (when recommended).
• Light sources using high intensity lamps will produce heat as well as light. The high
output of such systems can cause burns.
• Use care not to point the light directly at the eyes during operation; the brilliant light
can cause severe eye discomfort.
FIRE HAZARD: DO NOT DRAPE OR COVER THE LIGHT SOURCE OR THE FIBER
OPTIC CABLE WHILE IT IS OPERATING. DO NOT PLACE THE FIBER OPTIC CABLE
END ON THE DRAPES WHILE IT IS OPERATING.
CAUTION: The metal end fittings of the fiber optic cable get hot during operation.
Allow to cool outside the light source for at least 5 minutes before touching
LIT051CUDA
(English)
.
Rev. C
Page 3 of 50